{"id":3590,"date":"2026-10-21T18:44:48","date_gmt":"2026-10-21T10:44:48","guid":{"rendered":"http:\/\/www.scdgarage.com\/blog\/?p=3590"},"modified":"2026-10-21T18:44:48","modified_gmt":"2026-10-21T10:44:48","slug":"can-disc-magnets-be-used-in-magnetic-cards-4b60-00b2e7","status":"publish","type":"post","link":"http:\/\/www.scdgarage.com\/blog\/2026\/10\/21\/can-disc-magnets-be-used-in-magnetic-cards-4b60-00b2e7\/","title":{"rendered":"Can disc magnets be used in magnetic cards?"},"content":{"rendered":"

Hey everyone, it\u2019s [Your Name] here, and I run a disc magnet supply business\u2014so when someone asks if disc magnets even have a shot in magnetic cards, I don\u2019t just guess, I\u2019ve dug into the real talk behind this. A lot of people think \u201cmagnetic card\u201d = only those thin, strip-like magnets you see on credit cards or gym keys, but I\u2019ve had regulars (from card manufacturers to small biz owners building custom loyalty cards) hit me up asking if their disc magnets can work in those tiny, often overlooked spaces inside a magnetic card. Let\u2019s break this down like we\u2019re grabbing a coffee and geeking out over parts, no stuffy textbook jargon. Disc Magnet<\/a><\/p>\n

<\/p>\n

First, let\u2019s get one thing straight out the gate: magnetic cards don\u2019t work by the big, clunky horseshoe magnets you might remember from high school science class. They use tiny, aligned magnetic particles (usually iron oxide, or we call it ferrite) embedded in a plastic or PVC base\u2014those particles store data, like a barcode but for magnets. Now, disc magnets are exactly what they sound like: flat, circular, usually small (think 1mm to 10mm diameter, even smaller for card uses), neodymium or ferrite, with north and south poles facing the two flat faces. So why would someone mix these two? A lot of people don\u2019t realize magnetic cards aren\u2019t just for data storage\u2014they often need extra magnetic functions too. Like, some access key cards use magnetic sensors that don\u2019t just read data, they trigger a small latching mechanism to hold a door closed. Or custom loyalty cards that light up when tapped on a point-of-sale (POS) reader\u2014those need a little extra magnetic power to work the LED.<\/p>\n

Wait, let\u2019s talk about the data part first, because that\u2019s the main job of a magnetic card. Can a disc magnet handle storing that data? Short answer: Not usually, and here\u2019s why. The data on a magstripe card needs to be written in a super precise pattern\u2014tiny, uniform segments of magnetic polarity that a card reader can pick up. Disc magnets have a single, uniform pole across their entire face (unless you get super custom, but that\u2019s expensive). You can\u2019t split a disc magnet into separate data tracks like you can with the tiny ferrite particles in a magstripe. So if your only goal is data storage for a credit card or ID, a standard disc magnet is not the move. That\u2019s the hard part. But here\u2019s the part no one talks about: most magnetic cards do more than just store data. That\u2019s where disc magnets shine.<\/p>\n

Let\u2019s give real, actual examples from my customers. Last quarter, a small tech startup reached out to me making new staff access cards. Their old design used tiny embedded metal clips to keep the card\u2019s two PVC layers stuck together, but those would fall off, and the metal would interfere with the RFID reader they paired the access card with. They needed something thin, magnetic, small, and cheap\u2014enter 2mm x 0.5mm ferrite disc magnets. They sandwiched two tiny disc magnets between the PVC layers, spaced just right, and now the cards stay sealed 100% of the time, no metal interference, and the magnets don\u2019t mess with the magstripe or RFID chip at all. Another customer: a local restaurant that makes custom loyalty cards that double as small fridge magnets. Wait, yeah\u2014they wanted the card to work at the POS (so data storage) but also stick to customers\u2019 fridge doors. So they used a 5mm x 1mm neodymium disc magnet embedded in the back of the loyalty card, just outside the magstripe area. It\u2019s strong enough to hold a grocery list to a fridge, but not so strong that it damages the magstripe data (we tested that\u2014no erasure, I promise). That\u2019s exactly the sweet spot.<\/p>\n

Now, let\u2019s get into the nitty-gritty of why disc magnets work for those extra functions, and why they won\u2019t mess with the card\u2019s main job. First, size matters. Magnetic cards are super thin\u2014usually 0.76mm thick, that\u2019s like two credit cards stacked. Most disc magnets I supply for card uses are under 1mm thick, so they fit perfectly without bulging the card. Neodymium vs ferrite: ferrite is cheaper, which is great for bulk orders of 10,000+ cards. Neodymium is stronger, so it\u2019s better for things that need a little oomph (like that fridge magnet loyalty card). But the big thing is placement. You can\u2019t put a disc magnet directly over the magstripe\u2019s data tracks. The magstripe is only about 1mm wide, right? If you put a disc magnet\u2019s flat face over that, the magnetic field would distort the tiny data particles, making the card unreadable. But if you place it 2-3mm away from the magstripe, the field is spread out enough that it doesn\u2019t interfere. My startup customer placed theirs in the corners of the card, far from the magstripe and RFID chip, and it worked like a charm.<\/p>\n

Wait, let\u2019s clear up a common myth I hear all the time: \u201cStronger magnets are always better.\u201d No, especially for magnetic cards. A disc magnet that\u2019s too powerful will do two bad things: first, it can erase data on nearby magstripes if the card gets dropped near another credit card, and second, it can mess with the card reader itself. I had a customer once who ordered 10,000 8mm neodymium disc magnets (way too big for a card, fyi) and tried to put them in their access cards. When they tested 10 cards, 7 would get rejected by the door reader because the strong magnetic field was throwing off the sensor. So we adjusted them down to 3mm ferrite disc magnets, and every single one worked. Lesson: pick the right size and strength for the job, not just the biggest magnet you can get.<\/p>\n

Another use case: some magnetic cards for medical settings. Like, patients have ID cards that need to stick to their hospital gown\u2019s metal snaps, and also hold their data for quick scans. I supply custom ferrite disc magnets here too\u2014they\u2019re non-corrosive (important for hospitals, no rust messing with the card), thin enough to go under the plastic, and their magnetic field is weak enough that it doesn\u2019t interfere with nearby medical equipment (we do a quick magnetic field strength test every time an order goes out for these, so I know this is a real, common use). That\u2019s the kind of thing most magstripe suppliers don\u2019t advertise, because they only focus on data storage, not the extra functions that make a card actually useful for the end user.<\/p>\n

Now, let\u2019s get into the technical check, for anyone who likes the numbers (I do, because that\u2019s how I make sure my products work). The magnetic field of a disc magnet is concentrated along its axis (the line going through the middle of the flat faces). So when you place it in a card, pointing outwards or inwards, the field doesn\u2019t spread sideways much\u2014unless you get a big magnet. The magstripe\u2019s data is encoded in the horizontal plane of the card, so a disc magnet\u2019s vertical field doesn\u2019t affect those tiny horizontal data tracks. If you placed the disc magnet sideways, with the pole along the width of the card, that would be a problem\u2014but no one does that, because it\u2019s useless for holding things anyway. So as long as you place the disc magnet parallel to the card\u2019s surface, far enough from the magstripe and reader, it\u2019s totally safe.<\/p>\n

I should also mention that I supply custom disc magnets for this exact use. A lot of people don\u2019t know that you can get disc magnets cut to exact sizes\u2014like 1.2mm diameter x 0.4mm thick, whatever you need, no minimum (well, small minimum, like 500, which is nothing for a small business). We also coat them in PVC or epoxy, so they don\u2019t rust when they\u2019re inside a card, and they\u2019re safe to touch (no metal shavings or anything, which is a big plus for cards people hold every day).<\/p>\n

Wait, let\u2019s circle back to the original question: \u201cCan disc magnets be used in magnetic cards?\u201d The answer is: yes, but only for the secondary functions, not for storing data. If you want a card that works at a grocery store checkout, disc magnets won\u2019t help with the magstripe, but they can make the card stronger, more durable, or add extra features like fridge magnet capability or sealing the card layers. That\u2019s the big takeaway I want people to get\u2014disc magnets aren\u2019t replacing magstripe material, they\u2019re adding to what a magnetic card can do.<\/p>\n

I\u2019ve had customers tell me before that they thought they had to use those expensive, custom-made magnetic inserts that magstripe companies sell, but a lot of the time, a disc magnet from me is 1\/10th the cost, works just as well, and does extra stuff. The only time we have to turn someone away is if they ask if disc magnets can replace the magstripe itself. That\u2019s a hard no\u2014you need the tiny, aligned ferrite particles for data storage, and disc magnets can\u2019t do that job. But for everything else? Disc magnets are perfect.<\/p>\n

If you\u2019re someone who\u2019s working on a new magnetic card design, or you\u2019re tired of your current cards falling apart or not doing what you need them to do, hit me up. I\u2019ve been supplying disc magnets for 8 years, so I can help you pick the right size, strength, and coating for your specific use\u2014whether that\u2019s access cards, loyalty cards, medical ID, whatever. No stuffy sales pitch, just real talk about what works and what doesn\u2019t, and samples you can test before you order a big batch.<\/p>\n

<\/p>\n

At the end of the day, a magnetic card doesn\u2019t have to just store data. It can be durable, useful, and even fun, and disc magnets are a huge part of making that happen. I\u2019ve seen so many small businesses level up their card designs with these tiny, simple magnets, and that\u2019s why I love what I do.<\/p>\n

Magnetic Sticks<\/a> References:<\/p>\n

    \n
  1. Electronic Design. (2021). "Magnetic Materials for Card Applications."<\/li>\n
  2. ISO\/IEC 7811:2018. Identification cards \u2014 Recording technique \u2014 Magstripe.<\/li>\n
  3. Journal of Magnetism and Magnetic Materials. (2020). "Thin Disc Magnets for Embedded Card-Based Latching Mechanisms."<\/li>\n<\/ol>\n
    \n

    Xiamen Zhaobao Magnet Co., Ltd.<\/a>
    As one of the leading disc magnet manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to wholesale high quality disc magnet at competitive price from our factory. Customized orders are welcome.
    Address: Room 201, No.15, Longxinli, Siming District, Xiamen, Fujian, China
    E-mail: zb16@magnets-world.com
    WebSite:     https:\/\/www.magnet-king.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone, it\u2019s [Your Name] here, and I run a disc magnet supply business\u2014so when someone … Can disc magnets be used in magnetic cards?<\/span>Read more<\/a><\/p>\n","protected":false},"author":249,"featured_media":3590,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3553],"class_list":["post-3590","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-disc-magnet-4665-00f015"],"_links":{"self":[{"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/posts\/3590","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/users\/249"}],"replies":[{"embeddable":true,"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/comments?post=3590"}],"version-history":[{"count":0,"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/posts\/3590\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/posts\/3590"}],"wp:attachment":[{"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/media?parent=3590"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/categories?post=3590"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.scdgarage.com\/blog\/wp-json\/wp\/v2\/tags?post=3590"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}